Journal

2025

J93. T Kim*, TN Huynh*, H Cho, IH Cho, S Lee, JG Kim, S Kim, Design for controlling thermal and mechanical properties of graphene oxide/silk fibroin nanocomposites: Numerical analysis and experimental study, International Communications in Heat and Mass Transfer, accepted.

J92. 구본학, 여태경, 김진균, 한종부, 이영준, 박대길 (2025). 차압 및 심층신경망 기반 유압 로봇팔 끝단 반력 추정 (Hydraulic Manipulator End-tip Reaction Force Estimation Based on Differential Hydraulic Pressure and Deep Neural Network), 제어로봇시스템학회 논문지, 31(2), 137-145.

J91. S Oh*, G Park*, Y Cho, J Lee, S Park, T Lee, JG Kim, An inverse-forward dynamics for real-time operational clamping force prediction of BLAC motor, Mechanical Systems and Signal Processing, accepted.

J90. S Jang*, S Han*, JG Kim, J Choi, SS Rhim, JH Choi, SID-Net: Machine learning based system identification framework for rigid and flexible multibody dynamics, Multibody System Dynamics, accepted.

J89. YJ Kwon, JG Kim, SS Cho, J Gonzalez, A general bipenalty formulation for explicit contact-impact analysis with a parameter selection criterion, International Journal for Numerical Methods in Engineering, accepted. 

J88. J lee*, C Ahn*, J park, HS Kim, C Park, DI Park, JG Kim, Heat source and temperature estimation of integrated modular motor drive via inverse heat conduction problem, Measurement, 243, Feb 2025, 116297.

2024

J87. JG Kim, MF Baqir, KC Park, Method for reduced order modeling with mode selection criterion, AIAA Journal,  62(11), 2024, 4473-4485. 

J86. MS Go, YB Kim, JH Park, JH Lim, JG Kim, A rapidly trained real-time simulator for flexible multibody dynamics with fixed-time increment, Engineering with Computers, 40 (2024), 3131-3156.

J85. KC Park, C Farhat, CA Felippa, JA Gonzalez, JG Kim, KK Maute, YH Park, SJ Shin, A partitioned flexibility (PartFlex) method for structural analysis, Computer Methods in Applied Mechanics and Engineering, 429 (2024): 117155. .

J84. JY Lee*, SJ Han*, MY Kim, YS Seo, JW Park, DI Park, C Park, HW Seo, JH Lee, HS Kim, J Bak, H Rodrigue, JG Kim, J Cheong, SH Song, Variable-stiffness–morphing wheel inspired by the surface tension of a liquid droplet, Science Robotics, Vol 9, Issue 93, Aug 2024 [Online cover].

J83. H Shin, S Oh, YB Cho, J Gil, B Chung, J Shin, JG Kim, Hybrid Vibro-Acoustic Model Reduction for Model Updating in Nuclear Power Plant Pipeline with Undetermined Boundary Conditions, Nuclear Engineering and Technology, accepted.

J82. B Bondsman, C Ahn, JG Kim, Interface reduction technique for Enhanced Craig-Bampton method, Mechanical Systems and Signal Processing, accepted.

J81. M Ha*, Y Cho*, J Lee*, M Lee, H Baek, J Lee, J Seo, J Yoo, S Chun, K Kim, JG Kim, WG Lee, A hybrid upper-arm-geared exoskeleton with anatomical digital twin for tangible metaverse feedback and communication, Advanced Materials Technologies, accepted.

J80. S Han, G Orzechowski, JG Kim, A Mikkola, Data-driven friction force prediction using neural networks for hydraulically actuated systems,  Mechanism and Machine Theory, accepted.

J79. MS Go, S Han, JH Lim, JG Kim, An efficient fixed-time increment based data-driven simulation for general multibody dynamics using deep neural networks combined with principal component analysis,  Engineering with Computers, accepted. 

J78. H Lee, SJ Han, HS Choi, JG Kim, cNN-DP: Composite neural network with differential propagation for impulsive nonlinear dynamics, Journal of Computational Physics, 496, 112578, January 2024. 

J77. G Park, Y Cho, S Oh, J Lee, S park, T Lee, JG Kim, Virtual sensing system of vehicle steering motor with virtual reality (차량용 조향 모터의 가상센서 시스템 및 홀로렌즈 시각화), (한국소음진동공학회논문집), accepted (Excellent Paper Awards).

2023

J76. S Han*, GE Jeong*, HB Lee, WS Choi, JG Kim, Multi-body dynamics model for spent nuclear fuel transportation system under normal transport test conditions, Nuclear Engineering and Technology, 55, 4125-4133, 2023.

J75. KC Park, J Gonzalez, YH Park, SJ Shin, JG Kim, K Maute, C Farhat, CA Felippa, Displacement-Based Partitioned Equations of Motion for Structures: Formulation and Proof-of-Concept Applications, International Journal for Numerical Methods in Engineering, 124(22), 5020-5046, 2023.

J74. JG Ahn, H Yang, JG Kim, Multiphysics model reduction of thermomechanical vibration in a state-space formulation, Engineering with Computers, 39, 3371–3399, 2023.

J73. J Kim, JG Kim, J Park, BK Han, S Kim, DI Park, Multirobot path-planning algorithm for wiring harness assembly using redundantly actuated robotic systems, IEEE Access, 11 98427 - 98435, 2023.

J72.  KH Lee, RW Hagos, S Chang, JG Kim, Multiphysics mode synthesis of fluid-structure interaction with free surface, Engineering with Computers, 39, 2889-2904, August 2023. 

J71. S Oh, C Ahn, K Ahn, JG Kim, Implicit inverse force identification method for vibroacoustic finite element model , Journal of Sound and Vibration, accepted (https://doi.org/10.48550/arXiv.2211.12137).

J70. S Oh, H Baek, KH Lee, DS Jang, J Jun, JG Kim, A real-time unmeasured dynamic response prediction for nuclear facility pressure pipeline system, Nuclear Engineering and Technology, accepted.

J69. S Oh, HM Lee, JK Lee, HC Yoon, JG Kim, Real-time response estimation of structural vibration with inverse force identification, Structural Control and Health Monitoring, accepted.

J68. D Kam*, S Oh*, JG Kim, D Choi, Mechanical Buckling Assisted Formation of 3D Conductive Composite Meso-structure for Highly Sensitive Piezoresistive Pressure Sensor, Composite Structures, accepted.

J67. JH Rhu, W Kim, S Oh, B Divij, JG Kim, D Choi, Toward Optimizing Resonance for Enhanced Triboelectrification of Oscillating Triboelectric Nanogenerators, International Journal of Precision Engineering and Manufacturing-Green Technology, accepted. 

J66. J Lee*, SH Han*, J Sohn, BK Han, JH Lee, DI Park, JG Kim, Nonlinear torsional stiffness and hysteresis behavior analysis of harmonic drives using flexible multibody dynamics simulation, IEEE/ASME Transactions on Mechatronics, accepted.

2022

J65. C Ahn, SM Kim, D Park, JG Kim, Refining characteristic constraint modes of component mode synthesis with residual modal flexibility, Mechanical Systems and Signal Processing, accepted.

J64. C Ahn, A Cortiella, JG Kim, KC Park, Partitioned symmetric formulation and solution algorithms of thermoelastic interaction problems, Computer Methods in Applied Mechanics and Engineering, 400 (2022), 115529.  

J63. WJ Kwon, JG Kim, WS Lee, A framework for effective face-mask contact modeling based on finite element analysis for custom design of facial mask, PLOS ONE, accepted.

J62. C Ahn, S Oh, HS Kim, DI Park, JG Kim, Virtual thermal sensor for real-time monitoring of electronics packages in totally enclosed system, IEEE Access, accepted. 

J61. S Jang, JH Choi, SS Rhim, JG Kim, Flexible Multibody Dynamic Modeling of Dental X-ray Device and Its Experimental Validation (치과용 X-ray 장비의 실험을 통한 유연다물체 동역학 검증 모델 구축), Transactions of the KSME A (대한기계학회논문집 A), 2022. 46(5), 503-511.

J60. H Cho*, J Lee*, H Hwang, W Hwang, JG Kim, S Kim, Mechanical Properties of Graphene Oxide-Silk Fibroin Bionanofilms via Nanoindentation Experiments and Finite Element Analysis, Friction, 2021. https://doi.org/10.1007/s40544-021-0490-8 (Cover back).

J59. JG Ahn, H Yang, JG Kim, Multi-fidelity meta modeling using composite neural network with online adaptive basis technique, Computer Methods in Applied Mechanics and Engineering, accepted. 

J58. C Ahn, CH Park, DI Park, JG Kim, Optimal hybrid parameter selection for stable sequential solution of inverse heat conduction problem, International Journal of Heat and Mass Transfer, 183 (2022), 122076..

2021

J57. Petr Parik, JG Kim, Martin Isoz, C Ahn, A parallel approach of the enhanced Craig-Bampton method, Mathematics, accepted.

J56. KH Lee, S Chang, JG Kim, Iterative IRS method of fluid-structure interaction with free surface, Journal of Sound and Vibration, accepted. 

J55. JH Lee, HS Choi, JH Shon, GH Lee, D Park, JG Kim, The statistical analysis based on a analytical method for transmisson error of gear system with mechanical and thermal deformation uncertainties, Applied Sciences (Special issue: Special Issue: Tribology and Mechanical Transmissions), accepted. 

J54.S Han, HS Choi, J Choi, JH Choi, JG Kim, A DNN-based metamodeling techniques for real-time simulations of flexible multibody system dynamics (유연 다물체 동역학 시스템의 실시간 해석을 위한 DNN 기반 메타모델링 기법), Transactions of the KSME A (대한기계학회논문집 A), accepted (Excellent Paper Award). 

J53.JH Jang, SB Hong, JG Kim, N Goo, WR Yu, Acceleration testing method for predicting long-term properties of carbon fiber-reinforced shape memory polymer composites in a low Earth orbit environment, Polymers, 2021, 10.3390/polym13101628.

J52. S Oh, KH Lee, GH Ahn, KH Kim, JG Kim, Development of vibro-acoustic virtual sensing system for pipeline structure (디지털트윈 기술을 활용한 음향-진동 배관 시스템의 가상 계측 기술 개발), Transactions of the KSME A (대한기계학회논문집 A), accepted (Excellent Paper Award). 

J51. JG Ahn, JG Kim, H Yang, Interpolation multipoint constraints with selection criteria of degrees of freedom for flexible multibody dynamics, Applied Mathematics and Computation, accepted.

J50. IS Chung, JG Kim, SW Chae, KC Park, An iterative scheme of flexibility based component mode synthesis with higher order residual modal compensation,  International Journal for Numerical Methods in Engineering, 2021. https://doi.org/10.1002/nme.6656 

J49. HS Choi, J An, S Han, JG Kim, JY Jung, J Choi, G Orzechowski, A Mikkola, JH Choi, Data-driven simulation for general purpose multibody dynamics using deep neural networks, Multibody System Dynamics, 51(4), 419-454, 2021. 

J48. S Han, HS Choi, J Choi, JH Choi, JG Kim, A DNN-based Data-driven Modeling employing Coarse Sample Data for Real-time Flexible Multibody Dynamics Simulation, Computer Methods in Applied Mechanics and Engineering, Volume 373, 1 January 2021, 113480 .

2020

J47. SM Kim, SW Chae, JG Kim, Multiphysics model reduction of symmetric virbo-acoustic formulation with priori error estimation criteria, International Journal for Numerical Methods in Engineering, 121(23) (Special Issue: Credible High‐Fidelity and Low‐Cost Simulations in Computational Engineering), 15 December 2020, 5381-5404. .

J46. S Han, JG Kim, J Choi, JH Choi, Iterative coordinate reduction algorithm of flexible multibody dynamics using a posteriori eigenvalue error estimation, Applied Sciences (Special issue: Modeling, Design, and Optimization of Flexible Mechanical Systems), 2020, 10(20), 7143 

J45. S Oh, D Park, H Baek, S Kim, JK Lee, JG Kim, Virtual sensing system of structural vibration using digital twin (디지털트윈을 사용한 구조 진동 가상 센서 시스템), Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집), accepted (Excellent paper award).

J44. Y Ra, S Oh, JH Lee, Y Yun, S Cho, JH Choi, S Jang, HJ Hwang, D Choi, JG Kim, D Choi, Triboelectric signal generation and its versatile utilization during gear-based ordinary power transmission, Nano Energy, accepted.

J43. HS Choi, JG Kim, A Doostan, KC Park, Acceleration of uncertainty propagation through Lagrange multipliers in partitioned stochastic analysis, Computer Methods in Applied Mechanics and Engineering, 362, 112837, 15 April 2020.

J42. JG Ahn, H Yang, JG Kim, Multipoint constraints with Lagrange multiplier for system dynamics and its reduced-order modeling, AIAA Journal, 58(1), 385-401, January 2020.

J41. MS Go, JH Lim, JG Kim, KR Hwang, A family of Craig-Bampton method considering residual mode compensation, Applied Mathematics and Computation, 369, 124822, March 2020.

2019

J40. S Kim, J Choi, JG Kim, R Hatakeyama, H Kuribara, JH Choi, A coupled simulation of elastohydodynamics and multi-flexible body dynamics in piston-lubrication system, Advances in Mechanical Engineering, 11(12), 1-13, Dec 2019.

J39. JH Jang, SB Hong, JG Kim, NS Goo, WR Yu, Long-term properties of carbon fiber-reinforced shape memory epoxy/polymer composites exposed to vacuum and UV radiation, Smart Materials and Structures, 28, 115013,2019.

J38. JB Han, JG Kim, SS Kim, An efficient formulation for flexible multibody dynamics using a condensation of deformation coordinates, Multibody System Dynamics, 47(3). 299-316, 2019.

J37. SM Kim, SW Chae, KC Park, JG Kim, Performance of multiphysics model reduction of vibro-acoustic coupled problem (유체-구조간 결합을 고려한 진동-음향 모델의 축소), Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집), 29(4), 500,510, 2019 (Excellent paper award).

J36. SC Kim, JG Kim, YC Kim, SJ Yang, HM Lee, A study of electromagnetic vibration energy harvesters: design optimization and experimental validation, International Journal of Precision Engineering and Manufacturing-Green Technology, 6(4), 779-788, August 2019.

J35. D Bhatia, HJ Hwang, ND Huynh, S Lee, C Lee, Y Nam, JG Kim, D Choi, Continuous scavenging broadband vibrations via omnipotent tandem triboelectric nanogenerators with cascade impact structure, Scientific Reports, online published, June 2019.

J34. SM Kim, JG Kim, KC Park, SW Chae, Iterative component mode synthesis using a priori and a posteriori criteria, AIAA Journal, 57(5), 2145-2157, May 2019.

J33. SB Hong, JH Jhang, H Park, JG Kim, NS Goo, WR Yu, Three-dimensional constitutive model of woven fabric-reinforced shape memory polymer composites considering thermal residual stress, Smart Materials and Structures, 28, 035023, 2019.

J32. SM Kim, JG Kim, SW Chae, KC Park, A strongly coupled model reduction of vibro-acoustic interaction, Computer Methods in Applied Mechanics and Engineering, 347, 495-516, 15 April 2019 [GitHub]

J31. K Oh, S Park, J Seo, JG Kim, J Park, GH Lee, K Yi, Development of a predictive safety control algorithm using laser scanners for excavators on construction sites, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233 (8), 2007-2029, July 2019.

J30. IS Chung, JG Kim, SW Chae, KC Park, A formulation of flexibility based component mode synthesis for transient analysis, AIAA Journal, 57(2), 858-869, February 2019.

J29. JG Kim, J Seo, JH Lim, Novel modal methods for transient analysis with a reduced order model based on enhanced Craig-Bampton formulation, Applied Mathematics and Computation, 344-345, 30-45, March 2019. 

2018

J28. SY Cho, SK Choi, JG Kim, CH Cho, An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines, Advances in Mechanical Engineering, 10(9), 1-10, September 2018.

J27. JG Kim, GA Gang, SJ Cho, GH Lee, YJ Park, Dynamic stiffness effect of mechanical components on gear mesh misalignment, Applied Sciences, 8(6), 844, 2018.

After Kyung Hee University

J26. C Kim*, CH Cho*, I Son, H Lee, JW Han, JG Kim, JY Lee, Effect of microscale oil penetration on mechanical and chemical properties of carbon fiber-reinforced epoxy composites, Journal of Industrial and Engineering Chemistry, 61, 112-118, 25 May 2018.

J25. JG Kim, JB Han, HM Lee, SS Kim, Flexible multibody dynamics using coordinate reduction improved by dynamic correction, Multibody System Dynamics, 42(4), 411-429, April 2018.

J24. SM Kim, JG Kim, KC Park, SW Chae, A component mode selection method based on a consistent perturbation expansion of interface displacement, Computer Methods in Applied Mechanics and Engineering, 330, 578-597, March 2018.

2017

J23. SY Cho, SK Choi, JG Kim, CH Cho, Numerical study to investigate the design parameters of a wind tower to improve the performance of a vertical axis wind turbine, Advances in Mechanical Engineering, 9(12), 1–12, December 2017.

J22. JH Lim, DS Hwang, KW Kim, GH Lee, JG Kim, A coupled dynamic load analysis of satellites with an enhanced Craig-Bampton approach, Aerospace Science and Technology, 69, 114-122, October 2017. 

J21. JG Kim, YJ Park, GH Lee, DN Kim, A general model reduction with primal assembly in structural dynamics, Computer Methods in Applied Mechanics and Engineering, 324, 1-28, September 2017. 

J20. K Oh, J Seo, JG Kim, K Yi. MPC-based approach to optimized steering for minimum turning radius and active driving assistance of multi-axle crane, International Journal of Control Automation and Systems, 15, 1-15, 2017. 

J19. SY Cho, CW Rim, SK Choi, JG Kim, CH Cho. Utilization of 2.5-D CFD on the Performance Prediction of Vertical Axis Wind Turbine (수직축 풍력터빈 성능예측을 위한 2.5-D CFD 적용), New & Renewable Energy, 13(1), 4-16, 2017.

2016

J18. JG Kim, D Markovic. High-fidelity flexibility based CMS method with interface degrees of freedom reduction, AIAA journal, 54(11), 3619-3631, 2016. 

J17. JH Lim, DS Hwang, D Shon, JG Kim. Improving the reliability of the frequency response function through semi-direct finite element model updating, Aerospace Science and Technology, 54, 59-71, 2016.

J16. JG Kim, SH Boo, CO Lee, PS Lee. On the computational efficiency of the error estimator for Guyan reduction, Computer Methods in Applied Mechanics and Engineering, 305, 759-776, 2016. 

J15. SM Kim, JG Kim, SW Chae, KC Park. Evaluating mode selection methods for component mode synthesis, AIAA journal, 54(9), 2852-2863, 2016.

J14. SH Boo, JG Kim, PS Lee. Error estimation for the automated multi-level substructuring method, International Journal for Numerical Methods in Engineering, 106(11), 927-950. June 2016. 

J13. SH Boo, JG Kim, PS Lee. Simplified error estimator for the Craig-Bampton method and its application to error control, Computers and Structures, 164, 53-62, Feb 2016 .

2015

J12. J Kim*, JG Kim*, G Yun, PS Lee, DN Kim. Towards modular analysis of supramolecular protein assemblies, Journal of Chemical Theory and Computation, 11, 4260−4272, 2015. (* contribute equally).

J11. JG Kim, PS Lee. A posteriori error estimation method for the flexibility-based component mode synthesis, AIAA journal, 53(10), 2828-2837, 2015.

J10. KH Lee, SP Cho, KT Kim, JG Kim, PS Lee. Hydroelastic analysis of floating structures with liquid tanks and comparison with experimental tests, Applied Ocean Research, 52, 167-187, 2015. 

J9.  B Zhang, SH Boo, JG Kim. A new block assembly method for shipbuilding at sea, Structural Engineering and Mechanics, An International Journal, 54(5), 999-1016, 2015.

J8.  JG Kim, SH Boo, PS Lee. An enhanced AMLS method and its performance, Computer Methods in Applied Mechanics and Engineering, 287, 90-111, 2015.

J7.  JG Kim, PS Lee. An enhanced Craig-Bampton method, International Journal for Numerical Methods in Engineering, 103, 79-93, 2015 [GitHub].

J6.  SY Cho, CW Rim, SK Choi, JG Kim, JS Nam, SG Park. Numerical analysis on the performance of vertical axis wind turbine affected by the configuration of the wind power tower (풍력타워의 형상이 수직축 풍력터빈의 성능에 미치는 영향에 관한 수치적 연구), New & Renewable Energy, 11(2), 17-28, 2015.